Copyright © 2007 Nokia. All rights reserved.
Write text
30
Write text
When you write text, appears on the top right of the
display, indicating predictive text input, or appears,
indicating traditional text input. To set the predictive text
input on or off when writing text, press # repeatedly until the
desired mode is active.
, , or is displayed next to the text input
indicator, indicating the character case. To change the
character case, press #.
indicates the number mode. To change between letter
and number mode, press # repeatedly until the desired mode
is active.
Traditional text input
Press a number key, 1 to 9, repeatedly until the desired
character appears. Not all characters available under a
number key are printed on the key. The availability of
characters depends on the selected writing language. See
Writing language in “Language,” p. 69.
If the next letter you want is on the same key as the present
one, wait until the cursor appears (or scroll forward to end the
time-out period), and enter the letter.
To insert a number, press and hold the number key.
The most common punctuation marks and special characters
are available under the 1 key. For more characters, press and
hold *.
To erase a character, press the clear key. To erase more
characters, press and hold the clear key.
To insert a space, press 0. To move the cursor to the next line,
press 0 three times.
Predictive text input
To enter any letter with a single keypress, use predictive text
input. To activate predictive text input, press # repeatedly
until appears. This activates predictive text input for
all editors in the phone.
1 To write the desired word, press the keys 2–9. Press each
key only once for one letter. The word changes after every
keypress.
For the most common punctuation marks, press 1. For
more punctuation marks and special characters, press and
hold *.
To erase a character, press the clear key. To erase more
characters, press and hold the clear key.
To Next Page
Loading...
Need help?
General
