Copyright © 2007 Nokia. All rights reserved.
Settings
73
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
Security module
View or edit security modules.
Factory settings
Reset some of the settings to their original values. You
need the lock code. See “Lock code,” in “Access codes,”
p. 10.
Positioning
With the positioning service you can receive information
from service providers about local issues such as weather
and traffic conditions, based on the location of your device
(network service).
To enable a positioning method, select Positioning
methods, scroll to the positioning method, and select
Options > Enable. To stop using it, select Options >
Disable.
To define the positioning server access point, select
Positioning server > Access point and the desired access
point. Then select Server address, and enter the domain
name or URL address of the server.
Phone
Select Menu > Settings > Settings > Phone and Call,
Call divert, Call barring, or Network.
Call
Send my caller ID (network service) — to set your phone
number to be displayed (Yes) or hidden (No) from the
person whom you are calling. The value may be set by your
service provider when you subscribe to the service (Set by
network).
Call waiting (network service) — to set the network to
notify you of a new incoming call while you have a call in
progress. To request the network to activate call waiting,
select Activate. To request the network to deactivate call
waiting, select Cancel. To check whether the function is
active, select Check status.
Reject call with SMS — to enable rejecting phone calls
with a text message. See “Answer or reject a call,” p. 24.
Message text — to enter a text to be sent when you reject
a call with a text message
Image in video call — to select a still image to be shown
instead of the video when you deny video sending in a
video call
To Next Page
Loading...
Need help?
General
