Copyright © 2007 Nokia. All rights reserved.
Settings
75
Call barring and call diverting cannot be active at the same
time.
When calls are barred, calls may be possible to certain
official emergency numbers.
Network
Network mode — To select which network to use (shown
only if supported by the service provider). If you select Dual
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Operator selection — To set the phone to search for and
select automatically one of the available networks, select
Automatic. To select the desired network manually from a
list of networks, select Manual. If the connection to the
manually selected network is lost, the phone sounds an
error tone and asks you to select a network again. The
selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card
is in your phone.
Cell info display (network service) — To set the phone to
indicate when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception, select On.
Connection
Select Menu > Settings > Settings > Connection >
Bluetooth, USB, Access points, Packet data, SIP
settings, Configurations, or APN control.
Bluetooth
Switch Bluetooth on or off, and edit Bluetooth settings.
See “Bluetooth connection,” p. 81.
USB
Edit USB settings. See “USB data cable,” p. 83.
Access points
To establish a data connection, an access point is required.
You can define different kinds of access points:
• MMS access point to send and receive multimedia
messages
• WAP access point to view web pages
• Internet access point (IAP) (for example, to send and
receive e-mail)
Check which kind of access point you need with your
service provider for the service you wish to access. For
availability and subscription to data connection services,
contact your service provider.
To Next Page
Loading...
Need help?
General
