3 Push the card in, until you hear a click.
4 Replace the back cover.
Remove the memory card
Important: Do not remove the memory card when an application is using it.
Doing so may damage the memory card and the device, and corrupt data stored on the
card.
1 If the device is switched on, before you remove the card, press the power key, and
select Remove memory card.
2When Remove memory card? Some applications will be closed. is displayed,
select Yes.
3When Remove memory card and press 'OK' is displayed, remove the back cover
of the device, and push the card in, until you hear a click.
4 Pull out the memory card, and replace the back cover. If the device is switched on,
select OK.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it
before you can switch on your device for the first time. If the device indicates a low
charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
Get started 13
To Next Page
Loading...
Need help?
General
