Access points
Create a new access point
Select Menu > Settings and Connectivity > Destinations.
You may receive access point settings in a message from a service provider. Some or all
access points may be preset for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
1 Select
Access point.
2 The device asks to check for available connections. After the search, connections
that are already available are shown and can be shared by a new access point. If
you skip this step, you are asked to select a connection method and to define the
settings needed.
To view access points stored in your device, select an access point group. The different
access point groups are the following:
Internet access points
Multimedia messaging access points
WAP access points
Uncategorised access points
The different access point types are indicated with the following:
Protected access point
Packet data access point
Wireless LAN (WLAN) access point
Manage access point groups
To avoid selecting a single access point every time the device makes a network
connection, you can create a group that contains various access points to connect to
that network and define the order in which the access points are used. For example,
you can add wireless LAN (WLAN) and packet data access points to an internet access
point group, and use the group for browsing the web. If you give WLAN the highest
priority, the device connects to the internet through WLAN, if available, and through a
packet data connection if not.
Select Menu > Settings and Connectivity > Destinations.
Create a new access point group
Select Options > Manage > New destination.
Add access points to an access point group
Select the group and Options > New access point.
Connectivity 99
To Next Page
Loading...
Need help?
General
