GB 24
NAVI™ BARS NAVIGATOR
Games
• Press info to get instructions on how to play each game.
Settings ☛ Reinstall
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
Use this option only if you have to start the complete installation procedure from
scratch. If you continue from here, all your previous settings, access code and fa-
vourite channels etc. will be erased!
If you do not want to perform a reinstallation you can leave this menu when
the warning is displayed by pressing back.
Settings ☛ Time
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
The time is adjusted by using cursor up/cursor down, ±1/2 an hour at a time. You
can also adjust the minutes by using cursor left/cursor right.
Settings ☛ SW (software) update
In order to keep the Mediamaster up-to-date, it will be possible to download new
versions of the system software via satellite or with a Windows™ software pro-
vided by Nokia. From this menu you can only download new software via satellite.
New software may include new or improved features for existing menus.
Enter this menu to check if a new software version is available. If a new version is
available and you continue with the update, all your previous settings, access code
and favourite channels etc. will be erased!
IMPORTANT! Updating via satellite may take a while.
NEVER turn off the Mediamaster, never use the remote control or disconnect
the antenna/LNB cable during the download procedure! This will damage the
software and the receiver will have to be sent in for service!
Please check the latest updates for your receiver at Nokia’s web site
(www.nokia.com).
On the Nokia web site (www.nokia.com) you can download a Windows™ software
for updating the system software via the serial port. The serial port connector can
be found on the back of the Mediamaster (See page 9) .
To Next Page
Loading...
Need help?
General
