Do not pair with or accept connection requests from an
unknown device. This helps to protect your device from
harmful content.
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a time.
For example, if you are connected to a compatible
headset, you can also transfer files to another
compatible device at the same time.
1. Open the application where the item you want to
send is stored.
2. Tap an item, and select Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are as
follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can
be transmitted, a tone sounds, and you are asked
to enter a passcode. The same passcode must be
entered in both devices.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some devices
may show only the unique address (device
address). To find the unique address of your
device, enter *#2820#.
Pair devices
Select Menu > Settings and Connectivity >
Bluetooth.
To pair with compatible devices and view your paired
devices, open the Paired devices tab.
Before pairing, create your own passcode (1 to 16
digits) and agree with the owner of the other device to
use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as
well.
3. Some audio accessories connect automatically to
your device after pairing. Otherwise, to connect to
71
Connectivity
To Next Page
Loading...
Need help?
General
Weight and Dimensions
