EasyManuals Logo
Home>Notifier>Control Panel>NFS-320

Notifier NFS-320 User Manual

Notifier NFS-320
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22 NFS-320/E/C, NFS-320SYS/E Operations Manual — P/N 52747:E1 06/16/2011
Operation of the Control Panel System Trouble Mode of Operation
Typical Trouble message that appears on the LCD display:
Figure 3.6 Sample Trouble Message
3.5.2 How to Respond to a System Trouble
If the control panel indicates a trouble, you can do the following:
1. Press the ACKNOWLEDGE/SCROLL DISPLAY key to silence the panel sounder and switch the
SYSTEM TROUBLE LED from flashing to steady—regardless of the number of troubles, alarms,
security and supervisory signals.
2. The control panel sends an Acknowledge message to the History buffer and installed printers,
FDU-80 annunciators, and CRT-2s.
Figure 3.7 Sample Acknowledge Message
3. Check the trouble message for the location and type of trouble.
Figure 3.8 Sample Trouble Messages on CRT-2 or Printer
4. Correct the condition causing the trouble. If the trouble clears, the control panel sends a Clear
Trouble message to the History buffer and installed printers, FDU-80 annunciators, and
CRT-2s.
If all troubles clear and no supervisory signals or fire alarms exist, the control panel does the
following:
Returns to Normal operation (indicated by the “System Normal” message)
Sends a “System Normal” message to the LCD display, History buffer and installed printers,
FDU-80 annunciators, and CRT-2s
Restores troubles automatically - even if troubles are not acknowledged
If multiple trouble conditions exist in the system, the LCD and optional CRT-2 and FDU-80
annunciators display automatically step through each trouble every 3 seconds in the following
order:
1. Alarms, in order of address
2. Supervisory, in order of address
3. Troubles, in order of address
Type of event
Type of device
Custom descriptor for
this device location
Device address
Time and date of trouble
Type of trouble
Extended 12 character
custom label
TROUBL PULL STATION INTENSIVE CARE UNIT
EASTERN WING INVREP 03:14P 011511 2M147
NOTE: Pressing the SIGNAL SILENCE key when only troubles exist, gives the same result as
pressing the ACKNOWLEDGE/SCROLL DISPLAY key.
Time and date of Acknowledge
Status banner
ACKNOWLEDGE
03:15P 011511 Tue
TROUBL MONITOR MODULE ADDRESS M021 Z00 OPEN CIRCUIT 08:10A 041508 2M021
TROUBL MONITOR MODULE ADDRESS M022 Z00 OPEN CIRCUIT 08:12A 041508 2M022

Table of Contents

Other manuals for Notifier NFS-320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Notifier NFS-320 and is the answer not in the manual?

Notifier NFS-320 Specifications

General IconGeneral
BrandNotifier
ModelNFS-320
CategoryControl Panel
LanguageEnglish

Related product manuals