4.
•
•
•
•
Pulling the Unit Outwards
Press on the locking spring (appears in red in the figure below) on both sides simultaneously,
and continue pulling the unit towards you until it is fully removed.
Locking Mechanism
SN2740/SN2410 Static Rail Kit
Kit Part Number Legacy Kit Part Number Rack Size and Rack Depth Range
930-9NRKT-00JE-000 MTEF-KIT-BP Short: 19.7"-23.6" (50 to 60 cm)
930-9NRKT-00JV-000 MTEF-KIT-SP Standard: 23.6"-31.5" (60 to 80 cm)
The following parts are included in the static rail kit (see figure below):
2x Rack mount rails (A)
2x Rack mount blades (B)
8x M6 Standard cage nuts¹ ² and 8x M6 Standard pan-head Phillips screws¹ (C)
4x Phillips100 DEG F.H TYPE-I ST.ST 6-32 X 1/4 screw with around patch (D).
¹ Other threads are available by special order: M5, 10-32, 12-24. ² G-type cage-nut is available
by special order.
Rack Rail Kit Parts
By default, the system is sold with the standard-depth rail kit. The short-depth rail kit can
be supplied upon request.
To Next Page
Loading...
Need help?
General
