2.
3.
4.
Start a remote secured shell (SSH) using the command:ssh -l <username> <IP_address>
# ssh -l <username> <ip_address>
Mellanox Onyx (MLNX-OS) Switch Management
Password:
Login as admin (default username is admin, password isadmin).
Once you get the CLI prompt, you are ready to use the system.
For additional information about NVIDIA Onyx (MLNX-OS), refer to theNVIDIA Onyx (MLNX-OS) User
Manuallocated on theNVIDIA Networking Documentation Website.
Configuring Network Attributes Using Cumulus Linux
For Cumulus Linux initial configuration instructions, see Configuring Cumulus Linuxin the Cumulus
Linux Quick Start Guide.
Remote Connection with Cumulus Linux
Cumulus Linux uses the OpenSSH package to provide SSH functionality. To securely access a Cumulus
Linux switch remotely, please follow the instructions on the "SSH for Remote Access" page in the
Cumulus Linux User Guide.
FRU Replacements
Power Supply
NVIDIA systems that are equipped with two replaceable power supply units work in a redundant
configuration. Either unit may be extracted without bringing down the system.
To extract a power supply unit:
The following information does not apply to the SN2100/SN2010 series. The SN2100/SN2010
systems include two non-replaceable power supply units and four non-replaceable fan units.
Make sure that the power supply unit that you are NOT replacing is showing green for the
power supply unit LED.
Power supply units have directional air flows similar to the fan module. The fan module
airflow must coincide with the airflow of all of the power supply units. If the power supply
unit airflow direction is different from the fan module airflow direction, the system’s
internal temperature will be affected.For power supply unit air flow direction, refer to Air
Flow.
To Next Page
Loading...
Need help?
General
