120 6 Daily Care
IP Filter Feature via IP Address List
This feature allows you to register the IP addresses of computers that can be used in this
printer. This will limit IP address used for receiving print data.
1. Click [Maintenance].
2. Click [IP Filtering] from the left menu.
3. Select the [Enable] and click the [Edit] button.
4. Set the IP address permitted for TCP/IP connection in [Permitted IP Address].
5. Set the address mask in [IP Mask] corresponding to the registered IP address in
[Permitted IP Address].
For example, if the [Permitted IP Address] is 129.249.110.23 and the [IP Mask] is
255.255.255.0, the IP address for receiving print data is 129.249.110.* (* is from 1 to
254). This means that IP addresses from 129.249.110.1 to 129.249.110.254 can be
received.
6. Click [Submit] to reboot the printer.
To Next Page
Loading...
Need help?
General
