Introduction > 13
When the rear paper stacker is folded down paper exits the printer through the rear of the
printer and is stacked here face up. This is mainly used for heavy print media. When used
in conjunction with the multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in the paper path and
enables feeding of up to 250g/m² media.
C
HANGING
THE
DISPLAY
LANGUAGE
This can be set in the menu (Admin Setup > Others Setup > Language Setup > Select
Language) from the operator panel.
G
ETTING
STARTED
T
URNING
O
N
THE
P
OWER
1. Plug the AC cord (1) into the AC power socket of your printer.
2. Plug the AC cord into the electric socket.
3. Turn on the main power switch.
4. Hold down the power switch (2) for about 1 second to turn on the power.
The Power switch LED indicator lights up when the printer turns on.
The message “Ready To Print” is displayed in the operator panel once printer is
ready.
1
2
To Next Page
Loading...
Need help?
General
