Paper recommendations > 15
P
APER
RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of paper weights and
sizes, labels and envelopes. This section provides general advice on choice of media, and
explains how to use each type.
The best performance will be obtained when using standard 75~90g/m² paper designed
for use in copiers and laser printers. Suitable types are:
> M-Real Data Copy Everyday 80g/m²
> Color Copy by Mondi 90g/m²
Use of heavily embossed or very rough textured paper is not recommended.
Pre-printed stationery
Envelopes
Labels
Recommended type is Avery White Label types 7162, 7664, 7666 (A4), or 5161 (Letter).
CAUTION!
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Continued use of pre-printed stationery may cause the paper feed
performance to degrade over time and paper jams may occur.
Clean the paper feed rollers as described on page 64.
CAUTION!
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
CAUTION!
Labels should also be of the type recommended for use in copiers
and laser printers, in which the base carrier page is entirely
covered by labels. Other types of label stock may damage the
printer due to the labels peeling off during the printing process.
To Next Page
Loading...
Need help?
General
