Oki C712dn-b User Guide

Menu functions > 47
C ALIBRATION
ITEM SETTINGS EXPLANATION
Auto Density
Mode
On/Off Selects whether density adjustment and TRC
compensation is automatically performed.
On: Density adjustment is automatically run
under the engine-specified conditions, and
reflected in TRC compensation.
Off: The printer does not voluntarily run density
adjustment.
Adjust Density Execute If Execute is selected, the printer will
immediately adjust density and reflect it in TRC
compensation.
This adjustment must be executed when
the printer is idling. It can become invalid
if executed in any other state.
Adjust
Registration
Execute When this menu is selected, the printer
performs AutoAdjust Registration.
This adjustment must be executed when
the printer is idling.
Color Density Cyan/Magenta/
Yellow/Black
Density
-3,-2,-1,
0,+1,+2,+3,
Adjusts the engine density.
Print Tuning
Pattern
Execute Prints the pattern for the user to adjust TRC.
Ordinarily, this function is not needed because
TRC is automatically adjusted to the
recommended levels through density
adjustment and TRC compensation.
Adjustment results will be reflected as offset
values (addition) to the corrections through the
Adjust Density/TRC Compensation function.
Cyan/Magenta/
Yellow/Black
Tuning
Highlight -3,-2,-1,
0,+1,+2,+3,
Adjusts highlight (light area) of the TRC.
+ = Darker
- = Lighter
Mid-Tone -3,-2,-1,
0,+1,+2,+3,
Adjusts mid-tone area of the TRC.
+ = Darker
- = Lighter
Dark -3,-2,-1,
0,+1,+2,+3,
Adjusts dark area of the TRC.
+ = Darker
- = Lighter

Oki C712dn-b Specifications

General

Brand	Oki
Model	C712dn-b
Category	Printer
Language	English