Oki C712dn-b User Guide

Menu functions > 49
W IRELESS (I NFRASTRUCTURE ) S ETTING
ITEM SETTINGS EXPLANATION
Wireless
(Infrastructure)
Setting
Wireless(Infrastructure) Enable
Disable
Enables/disables the wireless LAN
(Infrastructure).
Network
Setting
IP Address Set Auto
Manual
Sets the IP Address setting
method.
IPv4 Address xxx.xxx.xxx.
xxx
Sets the IP Address.
Subnet Mask xxx.xxx.xxx.
xxx
Sets the Subnet Mask.
Gateway Address xxx.xxx.xxx.
xxx
Sets the Gateway (default router)
address.
DHCPv6 Enable
Disable
Sets Enable/Disable of DHCPv6.
Automatic
setup
(WPS)
WPS-PBC Executes WPS-PBC.
WPS-PIN Executes WPS-PIN.
Wireless
Network
Selection
xxxxxx
......
Lists the detected wireless LAN
(AP mode).
Manual
Setup
SSID Input the SSID.
Security Disable
WEP
WPA/WPA2-
PSK
WPA2-PSK
Sets the security function of the
wireless LAN.
* WPA/WPA2-EAP or WPA2-EAP
can be displayed only when it is
set from the web, and it cannot be
set from the menu.
WEP Key Input the WEP key.
WPA
Encryption
Type
AES
TKIP/AES
Displays the WPA-PSK encryption
type.
The setting is carried out
automatically according to the
setting of Security. (You cannot
change the setting manually with
this menu.)
It changes to AES when Security
is set to
WPA2-PSK or WPA2-EAP
and to TKIP/AES when Security
is
WPA/WPA2-PSK or WPA/
WPA2-EAP
.
Display Conditions:
Security is set to any other item
than Disable and WEP.
WPA Pre-
shared
Key
Input the pre-shared key.
Execute Enables the setting.
Wireless reconnection Reconnects to the wireless LAN.

Oki C712dn-b Specifications

General

Brand	Oki
Model	C712dn-b
Category	Printer
Language	English