Printing settings in windows > 88
M
ANUAL
DUPLEX
PRINTING
USING
THE
M
ULTI
P
URPOSE
T
RAY
1. Position the paper guides on the Multi Purpose Tray according to the paper size.
2. Place paper one sheet at a time in the Manual Feed Tray. The paper is automatically
gripped in position.
3. Select File -> Print to display the Print dialog box.
4. Click the Properties button.
5. Select the Multi Purpose Tray from the Source drop down.
6. On the 2-sided printing drop down menu, select either Long Edge (Manual) or
Short Edge (Manual) according to your printing preferences. If you require further
information, click the Duplex Help button.
7. When every second page has printed, take the paper from the output stacker.
8. Set the paper one page at a time in the Multi Purpose Tray with the printed side
facing down and the top of the page facing into the machine. Ensure that the paper
is gripped in place.
9. Press the Start button. The remaining pages of your document print on the blank
side of the paper, one sheet at a time as you feed it into the Multi Purpose Tray.
NOTE
> When using the Multi Purpose Tray on MB460, feed one sheet at a time.
> For loading instructions see “Multi purpose tray” on page 30.
To Next Page
Loading...
Need help?
General
