Printer settings in Mac OS X > 99
C
OVER
PAGE
Refer to “Cover page” on page 94.
E
RROR
H
ANDLING
Postscript errors
If an error occurs and stops the print job, you can use select the Print detailed report under
Error Handling, which will print the error page in detail. This will help you identify the error
and take suitable action.
Tray switching
If the printer runs out of paper in the current tray, the Auto Tray Switch automatically
changes to a tray that has the same type of paper and continues printing.
By selecting Display alert, a pop-up box will display on your application if there is a
mismatch between the tray settings and paper size settings.
P
APER
F
EED
If you want the first page of a document printed on a different media, you can load the
special media in the Multi-purpose tray and select the first page to be printed by setting
Multi-purpose tray as the source. The remaining pages of the document can be loaded in
the cassette tray and you can set that as the paper source. The entire document will be
printed in one print job.
To Next Page
Loading...
Need help?
General
