USING YOUR PRINTER > 15
FORMS TEAR-OFF
There are two ways to determine the status of the Forms Tear-Off
menu setting:
l Print the Menu.
l Use the TEAR key.
To print the Menu:
1.
Make sure paper is loaded.
2.
Hold
SHIFT
(2), then press
SEL
(1) to enter the Menu Mode.
3.
Press
PARK
(4) to print the menu.
4.
Look for the Form Tear-Off setting in the paper feed group you
are using (Rear Feed, Bottom Feed or Top Feed—Forms Tear–
Off appears in the Top Feed group only if the optional Roll
Paper Stand is installed).
To use the TEAR key:
1.
Make sure paper is loaded, and wait 2 seconds.
2.
Press
TEAR
(3).
l If the paper moves up, Forms Tear-Off is OFF.
l If the paper moves down, Forms Tear-Off is ON.
1
2
3
4
To Next Page
Loading...
Need help?
General
