Olympus AFU-100 User Manual

Instructions for Use EN Olympus AFU-100
14 WB135745-W10
4.2.1 Buttons / Switches
0 Power switch
This switch turns on and off the peristaltic pump unit.
1 / 2 / 3 Memory 1 / 2 / 3 button
The memory buttons are used to store and recall previously stored flow
levels. The level display (14) shows the selected flow level.
4 Flow activation / deactivation button
This button is used to activate / deactivate the peristaltic pump unit with the
selected flow level as shown in the level display (14).
5 / 6 Up / down button
These buttons increase / decrease the value displayed at the level display
(14).
4.2.2 Indicators
7 Error indicator
This indicator illuminates red if any error occurs.
8 / 9 / 10 Memory 1 / 2 / 3 indicator
The corresponding indicator signals if one of the memory buttons (1 / 2 / 3)
is pressed.
11 Flow activation indicators
These indicators signal the activation of the peristaltic pump unit with the
selected flow level as shown in the level display (14).
12 Electrosurgical unit assignment indicator
This indicator signals the communication assignment with an electrosurgical
unit.
13 Footswitch assignment indicator
This indicator signals the communication assignment with the peristaltic
pump unit footswitch.
4.2.3 Displays
Level display
This display shows the currently selected flow level.
3 … 100
Flow level
14
E##
Error notice and related error number (##)

Olympus AFU-100 Specifications

General

Brand	Olympus
Model	AFU-100
Category	Water Pump
Language	English