76
4
Advanced shooting
Adjusting the white balance
Color reproduction differs depending on the light conditions. For instance,
when daylight, the setting sun, or tungsten lighting are reflected on white
paper, the shade of white produced will be slightly different for each. By
setting the WB (white balance), you can achieve more natural-looking colors.
1 In the shooting mode top menu,
select MODE MENU → PICTURE →
WB, and press .
"How to use the menus" (P.32)
2 Press to select the white
balance best suited to the shooting
conditions. Choose from AUTO,
, , and .
AUTO (No indication) : The white balance is
adjusted automatically so that colors look natural
irrespective of the light source.
(Sunlight) : For natural colors under a clear sky.
(Overcast) : For natural colors under a cloudy sky.
(Tungsten) : For natural colors under tungsten lighting.
(Fluorescent) : For natural colors under fluorescent lighting.
3 Press .
• Press again to exit the menu.
4 Take the picture.
OK button
Arrow pad
To Next Page
Loading...
Need help?
General
