Omron CK5M-CPU 1 Series Startup Guide

39
7.2. Loading and Downloading a Project
1
Start Power PMAC IDE, and
connect to the Controller.
2
In the Terminal tab page, type
the $$$*** command to reset the
Controller settings to factory
default.
3
In the File menu, click Open –
Project/Solution to load the
project that you saved.
4
Right-click Configuration in the
Solution Explorer, and select
Download Config Files to
download the file to the
Controller.

Omron CK5M-CPU 1 Series Specifications

General

Brand	Omron
Model	CK5M-CPU 1 Series
Category	Controller
Language	English