Omron CK5M-CPU 1 Series Startup Guide

8
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
The applicable devices are as follows:
Manufacturer
Name
Model
OMRON
Programmable Multi-Axis Controller
Model CK3E-□□□□
OMRON
Programmable Multi-Axis Controller
Model CK3M-CPU11
Model CK5M-CPU11
OMRON
Servo Driver
Model R88D-1SN-ECT
OMRON
AC Servomotor
Model R88M-1□□□□□□-□
Precautions for Correct Use
In this document, the devices with models and versions listed in Section 5.2 are used as
examples of applicable devices to describe the procedures to connect the devices and check
their connections.
You cannot use devices with versions lower than the versions listed in Section 5.2.
To use the devices mentioned above with models not listed in Section 5.2 or versions higher
than those listed in Section 5.2, check the differences in the specifications by referring to the
manuals before operating the devices.
Additional Information
This document describes the procedures to establish the network connections. It does not
provide information on operations, installations, wiring methods, device functionalities, or
device operations, which are not related to the connection procedures. For more information,
refer to the manuals or contact your OMRON representative.

Omron CK5M-CPU 1 Series Specifications

General

Brand	Omron
Model	CK5M-CPU 1 Series
Category	Controller
Language	English