Omron H5S User Manual

6. Advanced Operations
- 43 -
6-1. Total Time/Count Display
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
<Resetting the total time and count>
Press for 3 s or more while the
total time or count is displayed.
Press to reset the total time
and total count.
WRITE
This function displays the total elapsed time and total count of
external inputs.
If the upper limit of the total time or the total count is set, it is
also possible to display the alarm indicator.
The resetting is cancelled
by pressing again while
“clr” is flashing.
Alarm indicator
Total time display
(Displayed when the total
elapsed time is 30,000 hours.)
Note
• Before using this function, input assignment is required. ( Section 6-6-2)
• How to display total time or count. ( Section 5-7)
• How to set the alarm value for the total time or count. ( Section 6-6-3, 6-6-4)
•
The alarm indicator, , will be displayed if either total time or count reaches
its preset alarm value.
• The total time display is shown in 0.1 hour unit.
•
When the total time/count exceeds 99999.9 h or 999999, the time/count returns to 0.
• The totalizing function cannot be used when power is OFF.
• Refer to "Section 3. Wiring" in the Installation for wiring.
Total count display
(Displayed when the total
input count is 500,000.)
CLEAR
CLEAR
The color indicates flashing.

Omron H5S Specifications

General

Brand	Omron
Model	H5S
Category	Timer
Language	English