Omron H5S User Manual

- 56 -
Press to confirm the setting.
(After is pressed, another
season can be set.)
Select a season from A to D to set the
period of a season using or .
Note
• The default is as follows.
A : 1. 1 to 12.31 (Jan/01 to Dec/ 31)
B to D : --.-- to --.-- (not specified)
"C" and "D" are not displayed in the 2 channel type.
• If the set periods are overlapped, the priority is increased in the following order. A B C D
<Example>Setting : A(January 1 to December 31), B(April 1 to September 30)
Performance : A(January 1 to March 31), B(April 1 to September 30), A(October 1 to December 31)
• The year cannot be specified.
•
On a leap-year day, February 29, the Time Switch performs the same operation as that of February 28.
• If period setting is not required, set the parameter to --.--.
•
If is pressed again before confirming the setting, the setting is cancelled.
• To leave initial setting mode, press for 3 s or more.
Press Key and specify the end
date with and .
Press to confirm the setting and
specify the start date with and .
Press for 3 s or more in program
setting mode to enter initial setting mode.
Give short presses on and
move to the F9 display.
"C" and "D" are not displayed in
the 2 channel type.
Weekly
2 chnls
Yearly
2 chnls
Yearly
4 chnls
The date on which the Time Switch automatically switches
programs can be set.
6-6-9. F9: Period of Season
Setting
The setting is made in F9 (period of season)
of initial setting mode.
M
M
D
D
The color indicates flashing.
TIME ADJ
TIME ADJ
TIME ADJ
TIME ADJ
h m
WRITE
WRITE
WRITE
WRITE
Set the Mode Switch to RUN.
⑥
Holding down these Keys rapidly
advances the value.
decrements the value of the Key that was last pressed.
Pressing
HOLIDAY/
SELECT PRGM/or

Omron H5S Specifications

General

Brand	Omron
Model	H5S
Category	Timer
Language	English