BY35S / BY50S / BY80S / BY120S
7
43
1. Connect the UPS to a computer.
Cable: Included connection cable (USB)
●
When using PowerAct Pro (4.x) software
The included “PowerAct Pro (4.x) “software allows you to automatically save fi les and perform
shutdown processing of your PC when a power failure occurs. (It is possible to shut down mul-
tiple computers on the network.)
Also, you can perform desired operation by setting the automatic start/stop of the battery mode
operation based on the scheduled setting.
* The time between the occurrence of a power failure and the shutdown of your PC must be
within the backup time measured in “5-1 How to measure backup time” on Page 28.
For more information and operation, refer to the “Quick Installation Guide for UPS Monitoring
Software” and the online help in the included CD-ROM.
7-1
When using the included UPS monitoring
software to perform auto shutdown
<USB>
Included connection cable (USB)
Connect to
USB Port
on UPS
Connector
Connect
to USB
terminal
Connector
USB
Port
Connect to
USB port
on PC
<BY35S/BY50S>
●
When using Simple Shutdown Software
The included “Simple Shutdown Software” allows you to automatically shut down the PC when a
power failure occurs.
For more information, refer to the manual in the CD-ROM.
2. Install the included “PowerAct Pro 4.x” or “Simple Shutdown Software” to
the PC you want to shutdown.
Installation method:
Refer to the “Quick Installation Guide for UPS Monitoring Software” for “PowerAct Pro 4.x”.
Refer to the manual in the CD-ROM for “Simple Shutdown Software.”
To Next Page
Loading...
Need help?
General
