Omron S Series User Manual

Omron TM Collaborative Robot S Series: TM12S and TM14S Hardware Installation Manual
43
3. Refer to 4.4 for Working distance and field of view of TM Robot’s EIH camera.
4. Electrical Specification of the Light Module
Voltage:
24V
Current (only for TM Robot’s light module):
< 100 mA
Current (for light modules from other
manufacturers):
< 900mA
Table 8: Electrical Specification of the Light Module
Fill light cable:
Figure 29: Electrical Polarity of Fill Light Cable
Connector:
2P/1.5 ㎜ pin pitch. Refer to JST model ZHR-4 series.
Dimming mode:
PWM control
NOTE:
The robot comes with the IP54 rating, but the Corporation does not guarantee this rating if
users replace with the other light modules.
DANGER:
Be aware that the tool must be correctly and firmly secured to use with this product; otherwise,
personal injuries or death may occur should the tool or the workpiece fall.
4.3 Operating Position of TM Robot with AGV/AIV
When TM Robot is placed on an AGV/AIV in operation, the TM Robot should be paused and should not exceed
the footprint of the AGV/AIV.
(+)
(-)

Omron S Series Specifications

General

Brand	Omron
Model	S Series
Category	Robotics
Language	English