Getting Started
22
N300 WiFi ADSL2+ Modem Router (N300RM)
EZ Setup Wizard
You can log in to the modem router and use EZ Setup to set up your Internet connection.
To use the EZ Setup wizard:
1. From the top of the modem router menu, select EZ Setup to display the following
screen:
2. Select either Yes or No, I want to configure the router myself. If you select No, proceed
to Internet Setup (Basic Settings) on page 26.
3. If you selected
Yes, click Next.
With automatic Internet detection, the EZ Setup Wizard searches your Internet
connection for servers and protocols to determine your ISP configuration.
The EZ Setup Wizard cannot detect a Point-to-Point Tunneling Protocol (PPTP) connection.
If your ISP uses PPTP
, you have to set your Internet connection through the screen
described in Internet Setup (Basic Settings) on page 26.
To troubleshoot an unsuccessful Internet connection:
1. Review your settings to be sure that you have selected the correct options and typed
everything correctly
.
2. Contact your ISP to verify that you have the correct configuration information.
3. Read Chapter 8, Troubleshooting. If problems persist, register your product and contact
technical support.
4. If you cannot connect to the modem router, check the Internet Protocol (TCP/IP) properties
in the Network Connections section of your Windows computer Control Panel.
They should
be set to obtain both IP and DNS server addresses automatically. See your computer
documentation.
To Next Page
Loading...
Need help?
General
