Advanced Settings
70
N300 WiFi ADSL2+ Modem Router (N300RM)
Advanced Wireless Settings
By default, the modem router is set up with wireless settings that work in most situations. You
can use this screen to control the wireless router radio and select advanced settings that
specifically fit your environment.
To view or change the advanced wireless settings:
Select Advanced > W
ireless Settings to display the following screen:
The following settings are available in this screen:
Enable Wireless Router Radio.
You can completely turn off the wireless portion of the
wireless modem router by clearing this check box. Select this check box again to enable the
wireless portion of the modem router. When the wireless radio is disabled, other members of
your household can use the modem router by connecting their computers to the modem
router with an Ethernet cable.
Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
Turn off wireless signal by schedule.
You can use this feature to turn off the wireless
signal from your modem router at times when you do not need a wireless connection. For
instance, you could turn it off for the weekend if you leave town.
WPS Settings.Y
ou can add WPS devices to your network.
Wireless Card Access List. Click the Set Up
Access List button display the Wireless Card
Access List screen. You can restrict access to your network to specific devices based on
their MAC address.
To Next Page
Loading...
Need help?
General
