Security Settings
55
N300 WiFi ADSL2+ Modem Router (N300RM)
1. Select Advanced > Port Forwarding/Port Triggering to display the following screen:
Port Forwarding is selected as the service type.
2. From the Service Name list, select the service or game that you will host on your network. If
the service does not appear in the list, see Add a Custom Service on page 55.
3. Click Add.
The service appears in the list in the screen.
Add a Custom Service
To define a service, game, or application that does not appear in the Service Name list, first
determine which port number or range of numbers the application uses. You can usually get
this information by contacting the publisher of the application or user groups or newsgroups.
To add a custom service:
1. Select Advanced > Port Forwarding/Port T
riggering.
2. Select Port Forwarding as the service type.
3. Click the Add Custom Service button to display the following screen:
4. In the Name field, enter a descriptive name.
5. In the list, select the protocol. If you are unsure, select TCP/UDP.
6. In the Start Port field, enter the beginning port number
.
• If the application uses a single port, enter the same port number in the End Port field.
• If the application uses a range of ports, enter the ending port number of the range in
the End Port field.
7. Click Apply.
The service appears in the list in the Port Forwarding/Port Triggering screen.
To Next Page
Loading...
Need help?
General
