Onkyo CR-505DAB User Manual

19
Using the CR-505DAB
1 Use the [INPUT] button, or the remote con-
troller’s INPUT [ ]/[ ] buttons to select
one of the following sound sources: CD,
DAB, FM or AM, TAPE, MD, LINE.
The currently selected source is shown on the display.
2 If you selected CD, see “Playing CDs” on
page 20.
If you select DAB, see “Using DAB” on page 24.
If you selected AM or FM, see “Using the Radio” on
page 28.
If you selected TAPE, MD, or LINE, start playback on
the relevant component.
1 To adjust the volume, use the [VOLUME]
control, or the remote controller’s VOL-
UME [ ]/[ ] buttons.
Turn the [VOLUME] control clockwise to increase the
volume; counterclockwise to decrease it.
You can connect a pair of stereo headphones to the CR-
505DAB’s PHONES jack for private listening, as shown.
Note:
Always turn down the volume before connecting your head-
phones.
Selecting Sound Sources
AMFMDAB
DIRECT
TAPE
CD
MD
MUTING
--
/
---
7
8
9
10/0
4
5
6
2
3
1
CLOCK
CALL
TIMER
CLEAR
REPEAT
DISPLAY
SLEEP
MODE
ENTER
INPUT
STANDBY/ ON
R
C
-
581
S
INPUT /
VOLUME UP
VOLUME DOWN
VOLUME control
STANDBY / ON
INPUT MENU
BASS
TREBLE
PUSH TO ENTER
PRESET
DIRECT
PHONES
VOLUME
MIN MAX
INPUT
Adjusting the Volume
Using Headphones
STANDBY / ON
INPUT MENU
PHONES

Onkyo CR-505DAB Specifications

Power Output

power output (DIN)	20 W + 20 W (4 Ω, 1 kHz)
power output (JEITA)	25 W + 25 W (4 Ω, 1 kHz)
dynamic power	30 W + 30 W (4 Ω)

Total Harmonic Distortion

THD (AMP)	0.2% (5 W Output, 4 Ω)
THD (FM Stereo)	0.46% (1 kHz)
THD (FM Mono)	0.4% (1 kHz)
THD (AM)	1.60%
THD (DAB)	0.20%
THD (CD)	0.01%

Frequency Response

frequency response (AMP)	10 Hz-50 kHz/+3 dB, –3 dB (LINE)
frequency response (FM)	30 Hz-15 kHz/+1.5 dB, –1.5 dB
frequency response (DAB)	20 Hz-20 kHz
frequency response (CD)	20 Hz-20 kHz

General Specifications

power supply	AC 230-240 V, 50 Hz
power consumption	75 W
stand-by power consumption	1.0 W
dimensions (W x H x D)	205 W x 103 H x 356 D mm
weight	5.3 kg