20
Playing CDs
1
Press the [ ] button to open
the disc tray, put the CD on
the tray with the label-side
facing up, and press the [ ]
button again to close the
tray.
Be sure to put 8 cm discs in the center of the tray.
2
Press the Play [ ] button to start play-
back.
Playback starts and the Play indicator appears on the
display.
■ To Stop Playback
• Press the Stop [ ] button.
■ To Pause Playback
• Press the Play/Pause [ / ] button on the CR-505DAB or
Pause [ ] button on the remote controller. The Pause
indicator appears.
• To resume playback, press the Play/Pause [ / ] button on
the CR-505DAB or Play [ ] button on the remote control-
ler.
■ To Fast Forward or Fast Reverse (remote
controller only)
During playback or while playback is paused, press and
hold the [ ] button to fast forward, or the [ ] button to
fast reverse.
For MP3, fast reverse only works within the MP3 track that
is currently playing.
If you press the button for more than four seconds, the fast
forward or fast reverse speed increases.
■ To Select Tracks
On the CR-505DAB:
Turn the [ ] control to select a track for playback. If
you select a track while playback is stopped, press the
[ ] control to start playback.
Press the [ ] control to jump to the next track during
playback.
On the remote controller:
Press the [ ] button to select the next track, or the [ ]
button to select the previous track.
If you press the [ ] button during playback or while play-
back is paused, the beginning of the current track is
selected.
If you select a track while playback is stopped, press the
Play [ ] button to start playback.
Note:
With CDs and MP3 discs that contain many tracks, play-
back may take a while to start.
You can use the number buttons to select specific tracks.
1
Use the number buttons to enter a track
number. Playback starts automatically.
For MP3 disc, select the serial number assigned to the
track.
To enter a track number smaller than or equal to 10,
press each number button. For example, to enter track
number 10, press [10/0].
Use the [--/---] button to enter track numbers above 10.
To enter a track number from 11 to 99, press
[--/---] once. For example, to enter track number 15,
press [--/---], [1] and [5].
To enter a track number greater than or equal to 100,
press [--/---] twice. For example, to enter tranck num-
ber 123, press [--/---] twice, [1], [2] and [3].
Playing CDs
STANDBY
/
ON
INPUT
MENU
BASS
TREBLE
PUSH TO ENTER
PRESET
DIRECT
PHONES
VOLUME
MIN MAX
/
AMFMDAB
DIRECT
TAPE
CD
MD
MUTING
--
/
---
7
8
9
10/0
4
5
6
2
3
1
CLOCK
CALL
TIMER
CLEAR
REPEAT
DISPLAY
SLEEP
MODE
ENTER
INPUT
STANDBY/ ON
--/---
Stop
Play/ Pause
Number
buttons
CD
operation
buttons
Label side
Selecting Tracks by Number
/
/
/
To Next Page
Loading...
Need help?
Power Output
