Onkyo DR-UN7 User Manual

27
Understanding Common Operations—Continued
You can select DVD, FM, AM, or connected external
audio/video equipment (HDD, CD-R, TAPE, LINE,
DIGITAL) as the audio source.
To select the audio source, press the INPUT or
button repeatedly.
Press MUTING on the remote controller. The MUTING
indicator lights in the display.
To restore the sound, press MUTING again.
Tip:
During muting:
• If you press VOLUME +/– on the remote controller,
the sound will be restored.
• If you turn the unit off and then on again, the sound
will be restored.
Press DIMMER on the remote controller
Every time you press the button, the display brightness
will change as follows:
Decrease the volume, then connect the stereo head-
phones mini plug to the PHONES jack.
You can adjust the volume and mute the sound as
described above.
The speakers will reproduce no sound while the head-
phones are connected.
Hint:
When you connect a pair of headphones, the listening
mode is set to Stereo, unless it’s already set to Stereo,
Mono, or Direct.
Selecting a Source
Muting the Sound
Remote
controller
DVD receiver
DIGITAL DVD FM AM
XM (US model only)TAPELINE
MUTING
Controlling Display Brightness
Listening through the Headphones
normal dim dimmer
To PHONES jack

Onkyo DR-UN7 Specifications

Power

power supply	AC 120 V, 60 Hz
power consumption	115 W
stand-by power consumption	0.2 W

Operating Environment

operating temperature	5 ˚C–35 ˚C
operating humidity	5 %–85 %
tuning frequency range	87.5 MHz–107.9 MHz

Audio Specifications

signal to noise ratio	100 dB (LINE, IHF-A)
frequency response	10 Hz–100 kHz/±3 dB (LINE)
total harmonic distortion	5 % (Power Rated)

Weight and Dimensions

dimensions	205 W x 147 H x 353 D mm
weight	5.4 kg