Onkyo FR-V77 User Manual

14
Programming FM stations automatically — Auto Preset
Auto presets store the frequencies of radio stations into memory so you can
select your favorite channels without tuning manually. Radio station signals can
be automatically located and stored. This function does not apply to AM stations
(see the next page).
1 Press STANDBY/ON to turn on
the unit.
2 Press FM/AM to display “FM.”
3 Press EDIT/CLEAR/NO to
display “AutoPreset?”
4 Press REPEAT/YES.
The confirmation message
“AutoPreset??” appears in the display.
To stop auto presetting, press EDIT/
CLEAR/NO.
5 Press REPEAT/YES.
Auto presetting starts. It scans for the
best signal quality radio stations
starting from the lowest frequency and
moving to the highest, then presets the
selected radio stations to the channels
sequentially, starting with 1.
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
Before presetting
• You can preset up to 30 channels including both
FM and AM stations.
• If any radio stations are preset in the channels
before you start auto presetting, all the preset
channels will be replaced.
Note
Auto presetting may store noise instead of a station with a
clear signal to some preset channels, depending on where
you live. In such cases, erase the preset manually (see
page 50).
If auto presetting is unsuccessful
Check the antenna (aerial) connection and position (see
page 6).
If you have a power failure or disconnect the AC
power cord (mains lead)
Memory will normally be preserved for two days after the
power supply has stopped. If the data in memory has been
erased, repeat auto presetting.
Customizing the preset channels
The following additional functions are available:
• Naming the preset channels (see page 37)
• Erasing the preset channels (see page 50)
• Copying the radio station in the selected channel to
another (see page 51).
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
STANDBY/ON
1
4, 5
3
2
FM/AM
EDIT / CLEAR
NO
REPEAT
YES
REPEAT
YES

Onkyo FR-V77 Specifications

Power

power supply	AC 220-230 V, 50/60 Hz
power consumption	63 W (220-230 V, 50/60 Hz)
power consumption (standby)	7 W
power consumption (energy save)	1.5 W

Amplifier Specifications

power output	2 × 26 W at 4 Ω EIAJ
total harmonic distortion	0.4 % at rated power
damping factor	25 at 8 Ω

CD Player

frequency response	10 Hz to 20 kHz (± 3 dB)
wow and flutter	Below threshold of measurability
signal readout system	Optical non-contact

MD Recorder

recording time	320 minutes maximum (at LP4 mode)
frequency response	10 Hz to 20 kHz (± 3 dB)
signal readout system	Optical non-contact

Tuner Specifications

tuning range	FM: 87.50 to 108.00 MHz
usable sensitivity	FM Mono: 11.2 dBf, 1.0 µV (75 Ω IHF)
signal to noise ratio	FM Mono : 73 dB IHF

Weight and Dimensions

dimensions	205 × 154 × 356 mm
weight	5.5 kg