Onkyo FR-V77 User Manual

30
Recording an FM/AM
broadcast program to an
MD
To record a very long program,
switch the recording mode.
(Refer to Step 2-4 on page 23.)
1 Insert an MD.
Refer to Step 1 on page 18.
Use a recordable MD.
2 Check the available recording time on the
MD.
Refer to Step 2 on page 23.
3 Select a recording mode.
Refer to Step 2-4 on page 23.
4 Select “FM” or “AM” for input.
5 Turn or repeatedly press MULTI JOG to
select a preset channel.
6 Press REC to set the FR-V77 into
recording standby mode.
7 Press MD (play/pause) to start
recording.
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
Recording input source
Recording track
number
Elapsed time
Numbering the desired song(s)
Press REC during recording of the desired song. If you do not
hold down
REC long enough (about four seconds or less), the
song may not be numbered.
If the FR-V77 does not
enter record stand-by
mode
See “Can’t dub?” on page 24.
Adjusting the recording
level
See page 29.
Turning Level Sync on or
off
See “Numbering the songs —
Level Sync” on page 31.
Tip!
During recording, you can
check the elapsed time and
remaining time on the MD
using the DISPLAY button (See
page 25).
Stopping recording
When the MD is recorded up to
the end, recording automatically
stops. To stop recording half
way, press MD
.
To pause recording
Press MD . The indicator
lights up on the display.
Press the button again to
resume recording from the
stopped point. At this time, the
track number increases by one.
1
6
5
8
7
4
EDIT/
CLEAR/NO
REPEAT/YES
FM/AM
CD DUBBING REC
MD

Onkyo FR-V77 Specifications

Power

power supply	AC 220-230 V, 50/60 Hz
power consumption	63 W (220-230 V, 50/60 Hz)
power consumption (standby)	7 W
power consumption (energy save)	1.5 W

Amplifier Specifications

power output	2 × 26 W at 4 Ω EIAJ
total harmonic distortion	0.4 % at rated power
damping factor	25 at 8 Ω

CD Player

frequency response	10 Hz to 20 kHz (± 3 dB)
wow and flutter	Below threshold of measurability
signal readout system	Optical non-contact

MD Recorder

recording time	320 minutes maximum (at LP4 mode)
frequency response	10 Hz to 20 kHz (± 3 dB)
signal readout system	Optical non-contact

Tuner Specifications

tuning range	FM: 87.50 to 108.00 MHz
usable sensitivity	FM Mono: 11.2 dBf, 1.0 µV (75 Ω IHF)
signal to noise ratio	FM Mono : 73 dB IHF

Weight and Dimensions

dimensions	205 × 154 × 356 mm
weight	5.5 kg