33
Signal Synchro Recording
Signal Synchro Recording starts recording onto an
MD when a signal is received from a source
connected to the input jacks.
1 Execute Steps 1 to 3 on the previous
page.
The MD is set to recording pause.
2 Press REC.
“Signal Rec” appears in the display, then the MD
switches to Signal Synchro Recording pause.
3 Start playing the selected source.
When a sound signal is received from the source,
the MD will automatically start recording.
(You do not need to press MD to start
recording in Step 5 on the previous page.)
4 Execute Step 6 on the previous page.
About Signal Wait
If the incoming signal stops for four seconds or longer
during recording (or eight seconds or longer when REC
mode is set to LP4), the MD recorder automatically
enters record stand-by mode. “Signal Wait” flashes in
the display and the track numbers are updated.
If the signal starts coming in within about 25 seconds,
the MD starts recording. (If more than 26 seconds
have elapsed without an incoming signal, the MD will
switch back to normal recording pause.)
During CD dubbing or double-speed CD dubbing,
howerver, the MD recorder waits for the next
incoming signal.
Notes
• This function always operates when the Level Sync
function is On. If you set the Level Sync function to Off
(see page 31), Signal Wait will not operate.
• The Level Sync function is turned on after Signal Synchro
recording.
• For track numbers to be marked automatically, a signature
code included in the digital signal at the beginning and
end of each track is required. Some equipment and
broadcasts do not include this signal, and in such a cases
track numbers are not marked automatically.
The following types of recording are possible when
you connect an Onkyo stereo cassette tape deck (see
page 9).
• Synchro Recording from the unit CD to the stereo
cassette tape deck
• Synchro Recording from the unit MD to the stereo
cassette tape deck
• Synchro Recording from the stereo cassette tape
deck to the MD unit.
For Synchro Recording from a CD or MD to the stereo
cassette tape deck, please refer to the
i
nstruction
manual for the
stereo cassette tape deck
.
Synchro Recording from a stereo cassette tape deck
to the MD unit is described below.
Synchro Recording from a stereo cassette
tape deck to the MD
While the MD unit is in recording pause mode, start
playing the stereo cassette tape deck. The source will
automatically switch to TAPE. Recording from the
stereo cassette tape deck to the MD starts
simultaneously.
To stop Synchro Recording
Press on the stereo cassette tape deck. The MD switches
to recording pause mode.
Synchro Recording operation
with an Onkyo stereo cassette
tape deck
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
SLEEP SOURCE C D TIMER M D M D
CH
C D
C D
ONCE
W.DAY
W.END
REC
L
R
S.BASS
-
40
-
20
-
10 0 OVER
-
6
-
2
MUTING DIGITAL CHAIN
REPEAT
DISC TRACK ELAPSED REMAIN TITLE
RDS MONO AUTO STEREO TUNED
1 TR MEMORY
RANDOM
LEVEL - SYNC
-
M D
DUB TOC
To Next Page
Need help?
Power
Amplifier Specifications
Weight and Dimensions
