Onkyo HT S5100 User Manual

62
Listening to SIRIUS Satellite Radio —Continued
Changing the PIN Number
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “10. Parental
Lock,” and then press [ENTER].
Note:
• If the 8. SAT RadioMode is set to
None (see page 56), the “Parental-
Lock” item is not available.
/
/
/
SETUP
ENTER
RECEIVER
Number
buttons
Remote
controller
Remote
controller
3
Use the Up and Down [ ]/[ ]
buttons to select “Edit Code,”
and then press [ENTER].
“Enter : <0>” appears on the display.
4
Use the number buttons to enter
the old PIN number.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, “8. Paren-
tal Lock,” and will need to start again.
“New : <0>” appears on the dis-
play.
5
Use the number buttons to enter
the new PIN number.
“Confirm: <0>” appears on the dis-
play.
6
Enter the new PIN number again.
If you enter the wrong PIN number,
“Wrong Code!” appears on the display.
You’ll be returned to step 2, “Parental
Lock,” and will need to start again.
7
Press the [SETUP] button.
Setup closes.
Remote
controller
Remote
controller
Remote
controller
Remote
controller
HT-S5100En.book Page 62 Monday, May 19, 2008 1:47 PM

Onkyo HT S5100 Specifications

General

Brand	Onkyo
Model	HT S5100
Category	Home Theater System
Language	English