Listening to the Radio—Continued
45
Listening to DAB Digital Radio (R-1045DAB only)
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III for the
multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Scan Function Manually
If a new DAB station is introduced, or you move to a
new area, you can run the Auto Tuning function
manually.
1 Press the [MENU/NO] button.
2 Use the Previous and Next [ ]/[ ] buttons to
select “Scan?” and then press [ ].
3 Use the Previous and Next [ ]/[ ] buttons to
select World or U.K., (see “Scan?” on page 47), and
then press [ ] to start the Auto Tuning function.
To cancel Auto Tuning, press the [ ], [MENU/NO]
or [MODE/YES] button.
If no station is detected after scanning, “No Station”
appears on the display.
You can also use the front panel controls.
1 Push the [MULTI JOG] control.
2 Turn the [MULTI JOG] control to select “Auto
Tuning?” and then push it.
3 Turn the [MULTI JOG] control to select World or
U.K., and then push it to start the Auto Tuning
function.
To cancel Auto Tuning, push the [MULTI JOG]
control.
Press the [TUNER] button repeatedly
to select “DAB”.
When tuned into a DAB station, the Tuned
indicator appears and the DAB indicator as
well.
On the front panel, press the [INPUT] knob
repeatedly to select “DAB”.
To Next Page
Loading...
Need help?
General
