Onkyo PHA-1045 User Manual

67
Specifications
R-1045 / R-1045DAB
Amplifier Section
Rated Output Power (IEC)
2ch ×70 W at 4 , 1 kHz, 2ch
Driven
THD (Total Harmonic Distortion)
0.08 % (1kHz 1W)
Damping Factor 35 (Front, 1 kHz, 8 )
Input Sensitivity and Impedance
115 mV/33 k (LINE)
2.0 mV/47 k (PHONO
MM)
Output Level and Impedance
125 mV/2.2 k (LINE)
Frequency Response 5 Hz-60 kHz/+1/.3 dB
(LINE1)
Tone Control Characteristies
±14 dB, 100 Hz (BASS)
±12 dB, 10 kHz (TREBLE)
+0 dB, -14 dB (BALANCE)
Signal to Noise Ratio 100 dB (LINE1, IHF-A)
75 dB(PHONO, IHF-A)
Speaker Impedance 4  - 16 
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 108.0 MHz
RDS
AM Tuning Frequency Range
522 kHz - 1611 kHz
DAB/DAB+ Tuning Frequency Range (R-1045DAB only)
174.928 MHz - 239.200 MHz
General Section
Power Supply AC 220-240 V, 50/60 Hz
Power Consumption 65 W
Stand-by Power Consumption
0.3 W
Dimensions 275W × 83H × 311D mm
(W × H × D) (10.8W × 3.3H × 12.2D
inches)
Weight 5.7 kg (12.54 lbs.)

Audio Inputs
Digital Inputs 2 (OPT/COAX)
Analog Inputs 3 (LINE)
1 (PHONO)

Audio Outputs
Analog Outputs 1 (LINE)
Subwoofer Pre Outputs
1
Speaker Outputs SP-L, R
Phones 1 (3.5I)

Others
USB 1 (Front)
RI 2
C-1045
CD Section
Frequency Response 5 Hz - 20 kHz
Audio Dynamic Range 100 dB
THD (Total Harmonic Distortion)
0.003 %
Rated RCA Output Level and Impedance
2.0 V (rms) / 470 
Signal to Noise Ratio 105 dB
Audio Output/Impedance(Digital/Coaxial)
0.5V p-p / 75 
Disc compatibility Audio CD, CD-R,CD-RW,
MP3/WMA (CD-R, CD-RW)
Operating conditions Temperature/Humidity
5-35 °C/ 25-80 %
General Section
Power Supply AC 220-240 V, 50/60 Hz
Power Consumption 9 W
Stand-by Power Consumption
0.3 W
Dimensions 275W × 83H × 282D mm
(W × H × D) (10.8W × 3.3H 11.0D inches)
Weight 3.4 kg (7.48 lbs)

Audio Outputs
Digital Outputs 1 (COAX)
Analog Outputs 1

Others
RI 2
Specifications and features are subject to change without notice.

Onkyo PHA-1045 Specifications

General

Brand	Onkyo
Model	PHA-1045
Category	Stereo System
Language	English