Using the Timers—Continued
61
Using the Sleep Timer
With the sleep timer, you can set the stereo receiver so
that it automatically turns off after a specified period.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP]
button.
Note that if you press the [SLEEP] button while the
sleep time is being displayed, you’ll shorten the sleep
time by 10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button
repeatedly until the SLEEP indicator disappears.
Press the [SLEEP] button repeatedly
to select the required sleep time.
With the [SLEEP] button, you can set the
sleep time from 90 to 10 minutes in 10
minute step.
Use the Previous and Next [ ]/[ ]
buttons or [MULTI JOG] control to set the
sleep time in 1 minute increments from 99
to 1.
When the sleep timer has been set, the
SLEEP indicator appears on the display, as
shown. The sleep time appears on the
display for about 8 seconds, then the
previous display reappears.
To Next Page
Loading...
Need help?
General
