EasyManuals Logo

Onkyo TX-NR636 User Manual

Onkyo TX-NR636
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device
4
Folk M (Folk music)
Document (Documentary)
3.
Press ENTER to search the radio stations of the
selected type.
4.
When the desired radio station is found, the station
name on the display flashes. Then, press ENTER again.
• If no stations are found, the message "Not Found" is
displayed.
Listening to Traffic Information (TP)
1.
Press RT/PTY/TP on the main unit thrice.
• When the traffic information is transmitted from the
radio station you selected, "[TP]" is displayed. "TP"
only is displayed if no traffic information is available.
2.
Press ENTER to search a radio station distributing traffic
information.
3.
When such a radio station is found, the indication on the
display flashes. Then, press ENTER again.
• "Not Found" is displayed if no radio station
distributing traffic information is found.
Playing Content from a USB
Storage Device
Operation: You can set up by viewing the guidance
displayed on the TV screen. To display the guidance, you
need to make HDMI connection between the unit and
TV. Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
Playing Back
1.
Press USB on the remote controller to select "USB".
2.
Plug your USB storage device with the music files into
the USB port of the unit so that "USB" lights on the
display.
• If the "USB" indicator flashes, check whether the
USB storage device is plugged in properly.
• Do not unplug the USB storage device while
"Connecting..." is appeared on the display. This may
cause data corruption or malfunction.
3.
Press ENTER.
• The list of folders and music files on the USB storage
device is displayed on the screen, select the folder
with the cursors and press ENTER to confirm your
selection.
4.
With the cursors, select the music file to play, and then
press ENTER or to start playback.

Table of Contents

Other manuals for Onkyo TX-NR636

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-NR636 and is the answer not in the manual?

Onkyo TX-NR636 Specifications

General IconGeneral
Channels7.2
Frequency Response5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode)
HDMI Inputs7
HDMI Outputs2
Dolby AtmosYes
Wi-FiYes
BluetoothYes
4K Pass-ThroughYes
Weight23.1 lbs (10.5 kg)
Network ConnectivityEthernet, Wi-Fi
Rated Output Power (1kHz, 1 channel driven)160 W (6 ohms, 1 kHz, 1 channel driven, JEITA)
THD+N (Total Harmonic Distortion + Noise)0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance200 mV/47 kΩ
Tone Control±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio100 dB (Line, IHF-A)
Speaker Impedance4 - 16 Ohms
Video Input Sensitivity and Impedance1 Vp-p/75 Ω
Component Video Frequency Response5 Hz-60 MHz/+0 dB, -3 dB
HDMI Support4K/60 Hz, HDCP 2.2
DTS:XNo
Dimensions435 x 173.5 x 329 mm
Audio Inputs2 Digital Audio (Optical and Coaxial)
Supported Audio FormatsMP3, WMA, WAV, AAC, FLAC, ALAC
Supported Video Formats4K/60 Hz, 3D
Power Output per Channel160 W (6 ohms, 1 kHz, 1 channel driven, JEITA)

Related product manuals