Onkyo TX-NR636 User Manual

Operating Other Components Using Remote Controller
43
VCR/PVR operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
1
2
3
4
1
REMOTE MODE
2
SOURCE
3
MUTING
4
CH +/-
58
9
6
7
5
GUIDE
6
/ / / , ENTER
7
SETUP
8
PREV CH
9
RETURN
F
G
H
F
, , , , , ,
G
Number 1 to 9, 0, +10
H
CLR, DISPLAY
Satellite receiver / Cable receiver operation
Press the REMOTE MODE button programmed with
the remote control code for the relevant AV component
to switch the remote controller mode to that for the AV
component. Then, operate by using the corresponding
buttons. Available buttons vary depending on the product
category of the component. Operation may be incorrect or
impossible depending on the product.
1
2
3
4
1
REMOTE MODE
2
SOURCE
3
MUTING
4
CH +/-
5
6
7
8
9
F
5
GUIDE
6
/ / / , ENTER
7
SETUP
8
PREV CH
9
RETURN
F
AUDIO
G
H
I
J
G
, , , , , ,
H
A (Red) B (Green), C (Yellow), D (Blue)
I
Number 1 to 9, 0, +10
J
CLR, DISPLAY

Onkyo TX-NR636 Specifications

General

Channels	7.2
Frequency Response	5 Hz-100 kHz/+1 dB, -3 dB (Direct Mode)
HDMI Inputs	7
HDMI Outputs	2
Dolby Atmos	Yes
Wi-Fi	Yes
Bluetooth	Yes
4K Pass-Through	Yes
Weight	23.1 lbs (10.5 kg)
Network Connectivity	Ethernet, Wi-Fi
Rated Output Power (1kHz, 1 channel driven)	160 W (6 ohms, 1 kHz, 1 channel driven, JEITA)
THD+N (Total Harmonic Distortion + Noise)	0.08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance	200 mV/47 kΩ
Tone Control	±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio	100 dB (Line, IHF-A)
Speaker Impedance	4 - 16 Ohms
Video Input Sensitivity and Impedance	1 Vp-p/75 Ω
Component Video Frequency Response	5 Hz-60 MHz/+0 dB, -3 dB
HDMI Support	4K/60 Hz, HDCP 2.2
DTS:X	No
Dimensions	435 x 173.5 x 329 mm
Audio Inputs	2 Digital Audio (Optical and Coaxial)
Supported Audio Formats	MP3, WMA, WAV, AAC, FLAC, ALAC
Supported Video Formats	4K/60 Hz, 3D
Power Output per Channel	160 W (6 ohms, 1 kHz, 1 channel driven, JEITA)