EasyManuals Logo

Onkyo TX-SR494 User Manual

Onkyo TX-SR494
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
81
Troubleshooting
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/o󰀨 or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not t well. After reconnecting, turn o󰀨 and on the
unit and the connected device.
The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically 82
Try restarting the unit 82
Resetting the unit
(this resets the unit settings to the default) 82
Troubleshooting 83
Power 83
Audio 83
Listening Modes 85
Video 86
Linked operation 86
Tuner 87
BLUETOOTH function 87
ZONE B function 88
Remote Controller 88
Display 88
Others 88

Table of Contents

Other manuals for Onkyo TX-SR494

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo TX-SR494 and is the answer not in the manual?

Onkyo TX-SR494 Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Output impedance4 - 16 Ω
Input sensitivity200 mV
4Ω speaker supportYes
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)109 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (20-20KHz@8 Ohm)80 W
HDMI in4
Audio (L/R) in3
Digital audio optical in1
Component video (YPbPr/YCbCr) in0
Audio (L/R) out8
Connectivity technologyWired
Speakers connectivity typeBanana connector/Binding posts
Wi-FiNo
AM band range530 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Preset stations quantity40
AirPlay-
DisplayLCD
HDCP version2.2
Product colorBlack
Audio decodersDTS Virtual:X, Dolby Atmos
AC input voltage120 V
AC input frequency60 Hz
Power consumption (standby)0.1 W
Power consumption (typical)490 W
THX-certifiedTHX
Weight and Dimensions IconWeight and Dimensions
Depth328 mm
Width435 mm
Height160 mm
Weight10500 g

Related product manuals