Oracle ZFS ZS3 Series User Manual

Servicing the Oracle ZFS Storage Appliance
This document encompasses the following sections that describe maintenance procedures for
the Oracle ZFS Storage Appliance.
To service the appliance hardware components, use the following sections:
■
“Getting Started with Servicing the Hardware” on page 15
■
“Prerequisites for Servicing Hardware” on page 49
■
“Servicing the ZS4-4 Controller” on page 55
■
“Servicing the ZS3-4 Controller” on page 89
■
“Servicing the ZS3-2 Controller” on page 127
■
“Servicing the 7x20 Controller” on page 173
■
“Servicing the Disk Shelves” on page 255
To maintain the system, use the following sections.
■
“Viewing System Disks Status” on page 291
■
“Working with Support Bundles” on page 293
■
“Performing the Initial Setup” on page 301
■
“Restarting the Appliance” on page 303
■
“Backing Up the Configuration” on page 307
■
“Working with Software Notifications and Updates” on page 317
■
“Upgrading Software on a Standalone Controller (BUI)” on page 323
■
“Upgrading Software on a Standalone Controller (CLI) ” on page 324
■
“Upgrading Software on Clustered Controllers” on page 327
■
“Working with Health Checks” on page 337
■
“Deferred Updates” on page 343
■
“Working with Firmware Updates” on page 355
■
“Rolling Back System Software” on page 359
■
“Removing an Update Package (BUI)” on page 363
Servicing the Oracle ZFS Storage Appliance 13

Oracle ZFS ZS3 Series Specifications

General

Brand	Oracle
Model	ZFS ZS3 Series
Category	Storage
Language	English