Chassis Details View
Property Description
FMRI Fault managed resource identifier (FMRI) for the component. This is
an internal identifier used to identify the component within faults and is
intended for service personnel.
Active Problems For a faulted component, links to active problems affecting the component.
Manufacturer Component manufacturer.
Model Component model.
Build Manufacturing build identifier. This is used to identify a particular location or
batch where the component was manufactured.
Part Component part number, or core factory part number. The orderable part
number may differ, depending on whether a component is for replacement or
expansion, and whether it is part of a larger assembly. Your service provider
should be able to refer you to the appropriate orderable part. For components
without part numbers, the model number should be used instead.
Serial Component serial number.
Revision Firmware or hardware revision of the component.
Size Total memory or storage, in bytes.
Type Disk type. Can be one of System, Data, Log, Cache, Spare, or Peer. When a
spare is active, it will be displayed as Spare [A]. When a disk type is shown
as Peer, it indicates that the disk is configured as part of a pool that is owned
by the cluster peer.
Speed Processor speed, in gigahertz.
Cores Number of CPU cores.
GUID Hardware global unique identifier.
Endurance The lifetime percentage remaining on an SSD. Lifetime starts at 100% and
decreases with disk usage.
Last Update The date and time of the last endurance reading of the SSD.
Disk Shelf Details View
The details view provides information for each device installed in the disk shelf.
Getting Started with Servicing the Hardware 23
To Next Page
Loading...
Need help?
General