Oracle ZFS ZS3 Series User Manual

Servicing the ZS3-4 Controller
Be sure to read sections “Getting Started with Servicing the Hardware” on page 15 and
“Prerequisites for Servicing Hardware” on page 49.
Most hardware faults clear after replacing the affected component. If a fault does not self-clear,
see “Repairing Active Problems” on page 37.
Oracle DE2-24s and Sun Disk Shelves can be used together with standalone and clustered
controllers after certain hardware modifications. Contact Oracle Service to upgrade your
controllers for disk shelf interoperability.
To service ZS3-4 hardware components, use the following tasks.
■
“Replacing a ZS3-4 HDD or SSD” on page 89
■
“Replacing a ZS3-4 Fan Module” on page 91
■
“Replacing a ZS3-4 Power Supply” on page 93
■
“Replacing a ZS3-4 DIMM” on page 95
■
“Replacing a ZS3-4 PCIe Card or Riser” on page 104
■
“Replacing a ZS3-4 Battery” on page 108
To understand the ZS3-4, see the following topics:
■
“ZS3-4 Base Configuration” on page 111
■
“ZS3-4 Specifications” on page 111
■
“ZS3-4 Front and Rear Panel Components” on page 112
■
“ZS3-4 Internal Components” on page 116
■
“ZS3-4 PCIe I/O Cards” on page 121
■
“ZS3-4 Attached Storage” on page 125
Replacing a ZS3-4 HDD or SSD
HDDs and SSDs are hot-swappable and can be removed and installed while the storage
controller is running without affecting other hardware capabilities. Use the following procedure
Servicing the ZS3-4 Controller 89

Oracle ZFS ZS3 Series Specifications

General

Brand	Oracle
Model	ZFS ZS3 Series
Category	Storage
Language	English