ENGLISH
9
î
Use the + and â buttons to set the correct date, then press enter.
The display will show the correct time and date. After the time of day, date, and
year are set, this procedure does not need to be entered again for any other
programming.
(Note: If a watering schedule is not entered into the timer, the factory installed
fail-safe program will turn on each station every day for 10 minutes. To avoid acci-
dental station activation, either turn the rotary switch to off or enter a watering
schedule.)
Determine a Watering Plan
To help you visualize how best to program the timer, it might be helpful to make a
watering plan on paper. This will help you establish which days and times you want
to water.
SECTION THREE
Programming
The timer has two programs you may setup to control a variety of watering plans.
Depending on your needs, you may use either or both programs.
To Next Page
Loading...
Need help?
General