SAFETY
Table 3-1:
Safety symbols used on this product or in this document
Symbol Signal word Definition
DANGER!
Potentially dangerous situation which may lead to per-
sonal injury or death! Follow the instructions closely.
CAUTION!
Potential equipment damage or destruction!
Follow the instructions closely.
NOTE
Tips and other useful or important information.
ESD
Risk of Electrostatic Discharge!
Avoid potential equipment damage by following ESD Best
Practices.
CHASSIS GROUND
This symbol is used for identifying the functional ground
of an I/O signal. It is always connected to the instrument
chassis.
Analog Ground
Shows where the protective ground terminal is con-
nected inside the instrument. Never remove or loosen
this screw!
Recycle
Recycle the mentioned components at their end of life.
Follow local laws.
3.1 SAFETY: Before You Begin Installation
DANGER! If the equipment is used in a manner not specified by the man-
ufacturer, the protection provided by the equipment may be impaired.
26
VersaSync Getting Started Guide Rev. 8
3.1 SAFETY: Before You Begin Installation
To Next Page
Loading...
Need help?
General