Outback Power Systems FX2024ET User Manual

2
EU DECLARATION OF CONFORMITY
According to ISO / IEC Guide 22 and EN45014
Product Type: Inverter/Charger
Product Model Numbers:
• FX2012ET • FX2024ET • FX2348ET • VFX2612E • VFX3024E • VFX3048E
The OutBack Power Systems FX Series Inverter/Chargers export (“E”) models comply with the following
EU directives when installed in o -grid applications only:
• EU Declaration of Conformity regarding Electromagnetic Compatibility 89/336/EEC (“Council
Directive of 3 May 1989”)
• Low Voltage Directive 73/23/EEC (“Council Directive of 19 February 1973”).
The compliance of the above-mentioned products with the directive and the following essential
requirements is hereby con rmed:
Emissions Immunity Safety
EN 61000-6-3 (2001) EN 61000-6-1 (2001) EN 61000-3-2 (2000) EN 61000-3-3 (1995)
These inverter/chargers are not to be connected to the mains under any circumstances.
The AC-IN connection on each E model inverter/charger is only approved for connection to an AC
generator.
All associated technical  les are located in the Engineering Department at OutBack Power Systems, Inc.,
Arlington, Washington, USA.
As the manufacturer, we declare under our sole responsibility that the above-mentioned products
comply with the above-named directives.
19009 62nd Ave. NE
Arlington, WA. 98223 USA
(360) 435-6030

Outback Power Systems FX2024ET Specifications

General

Brand	Outback Power Systems
Model	FX2024ET
Category	Battery Charger
Language	English