Intercom Features
45
Document Version 2010-07
Intercom features between
handsets
Intercom
Intercom calls can be made between handsets.
Note:
L If you receive an outside call while talking on the
intercom, you hear interrupt tones (page 28). To
answer the call, press {i}, then press {C}.
L When paging the handset, the paged handset
beeps for 1 minute.
Making an intercom call
1 1 (centre of joystick) i {V}/{^}:
“Intercom” i M
2 {V}/{^}: Select the desired unit. i ]
L To stop paging, press {i}.
3 When you finish talking, press {i}.
Answering an intercom call
1 Press {C} to answer the page.
2 When you finish talking, press {i}.
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without pressing any
buttons on the handset.
– listen to the sound in a room where the handset
is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On (Ringer On)”: When an intercom call is
received, the handset rings 2 times then the
speakerphone is automatically turned on.
“On (Ringer Off)”: When an intercom call is
received, the handset does not ring and the
speakerphone is automatically turned on. This
allows you to easily monitor a baby’s room, for
example, from different areas of the house.
1 1 (centre of joystick) i {#}{2}{7}{3}
2 {V}/{^}: Select the desired setting.
3 M i {i}
Note:
L Auto intercom cannot be used when:
– your handset is receiving a transferred
outside call.
– all handsets are being paged by the base unit.
Answering an intercom call using auto
intercom
1 When you are paged by another handset,
speak into the microphone.
L To switch to the receiver, press {C}.
2 To end the intercom, press {i}.
Monitoring audio in a room
You can listen to the sound in a room where
another handset is located.
Important:
L Before using this feature, set auto intercom on
the destination handset to “On (Ringer
Off)” to allow access by other handsets.
1 Call the destination handset (page 45).
L You can listen to the audio.
2 To mute your sound output, press 1 if
necessary.
3 Press {i} to stop monitoring.
Transferring calls
Outside calls can be transferred between 2
handsets.
1 During an outside call, press 1.
2 {V}/{^}: “Intercom” i M
3 {V}/{^}: Select the desired handset. i ]
4 Wait for the paged party to answer.
L If the paged party does not answer, press
{C} to return to the outside call.
5 {i}
Transferring a call without speaking to the
other handset user
1 Perform from step 1 to 3, “Transferring calls”,
page 45.
2 {i}
L The outside call rings at the other handset.
Note:
L If the other handset user does not answer the
call within 1 minute, the call rings at your
handset again.
To Next Page
Loading...
Need help?
General
