32
Quick 30 feature
This feature allows you to set cooking time in 30 seconds increments up to
5 minutes at 1000 W (High) MICROWAVE power.
It is only available for MICROWAVE.
Press Quick 30 to set the
desired cooking time.
Time appears in the display.
Press Start.
The time counts down in the
display.
Notes
1. After the operation is nished, “Add” is displayed for about 1 minute on the
display. While displaying, you can use ADD TIME feature, refer to below.
2. If desired, you can use other power levels. Select the desired power level
before pressing Quick 30.
3. After setting the time by Quick 30, you cannot use dial.
This feature allows you to add cooking time at the end of previous cooking.
It is available for MICROWAVE, GRILL, CONVECTION and COMBINATION
cooking.
Turn the dial to set the additional time.
Up to 30 minutes for 1000 W (High)
MICROWAVE power, 90 minutes for other
MICROWAVE powers, and 9 hours for
GRILL, CONVECTION and COMBINATION
cooking.
Press Start.
The time counts down in the
display.
Notes
1. After the operation is nished, “Add” is displayed for about 1 minute on the
display. While displaying, you can use ADD TIME feature again.
2. During cooking, turn the dial to set the additional cooking time (10 seconds to
10 minutes).
3. ADD TIME feature will be cancelled, if you do not perform any operation for
1 minute after cooking, or if you open the door or press any button when “Add”
is displayed.
4. ADD TIME feature can be used after MULTI-STAGE COOKING. The power
level is the same as the last stage. This function will not operate if the last
stage was standing time.
5. ADD TIME feature is not available for AUTO PROGRAMMES.
Add time feature
NN-C69KSM_EPG.indb 32 2019/07/29 18:14:49
To Next Page
Loading...
Need help?
General
